• SIMPLE TO OPERATE
• ADAPTABLE FOR ROUND, FLATS,
  SHAPED WIRES
• LOW CONSUMPTION OF CURRENT
• PORTABLE AND EASY TO HANDLE
• LIGHT AND COMPACT
• OPTIONS:
  ELECTRIC GRINDER FOR BURR REMOVAL
  WHEELED TROLLEY
  Type SG BUILT AS SPECIAL
  FLAT STRIP MODEL:
  1.0MM-15MM WIDE:
  0.50-UP TO 1.0MM THICK
  NONE FERROUS MODEL.
  WELDS ROUND WIRE 0.50-3.0MM
  Aluminum and ferrous model
• Alternative clamping devise
  for flat strip & shaped wires

Electrodes made to suit wire shapes and sizes.
Spare parts repairs/recondition.

Standard models 1 & 2 can be fitted with an electric lamp to assist the operator, which automatically comes on when the machine is connected to the electrical supply.
The Microwelder is fitted with a wire cutter to ensure the wire ends are square.
The movement of the electrodes/jaws is controlled by enclosed parallel guides which ensure that the finest and heaviest wires are welded in alignment.
One set of standard electrodes/jaws cover the complete welding capacity of the machine.
Pressure regulating control is done by marked graduations on an adjusting screw.
Spacing electrodes is done by operating the Eccentric lever marked for different wire gauges.
Regulation of the welding or annealing current by means of a 6-step heat switch.
Contact button & automatic circuit breaker are combined in a simply constructed unit. The contacts consist of tungsten pins and will operate for many years.